SR3 On-Board Batteries
Tired of running out of on-board power with your SR3 cameras?
By choosing our on-boards you will be immediately rewarded with the ultimate in run-time for these very popular cameras complemented by better overall camera balance. The overwhelming number of camera accessories has neccesitated an increase in on-board battery capacity. With these new on-boards you can be confident that you have enough power to get you through the shot – and the one after that – without any modifications to your camera whatsoever.
The voltage has also been increased for better cold weather operation. Nothing has been spared to bring you the absolute finest batteries for these superb and popular cameras.
In proud Lentequip fashion, only the best materials are used. Once you have experienced these batteries you will truly appreciate the power, design and craftsmanship that has taken over a year to perfect. On the SR3 on-board we have even implemented a 3 pin Fischer 24 volt output connector to power accessories directly from the battery!
|Voltage / Capacity||26.4 V, 2.5 Ah||25.2 V, 4.0 Ah||14.4 V, 3 Ah|
|Weight||1.6 kg (3.5 lb)||1.3 kg (2.9 lb)|
|Construction||ABS alloy||ABS alloy||ABS alloy|
|Charge Time||Approx. 1 hr||Approx. 4 hr||Approx 1.5 hr|
|Cell Type||Sanyo NiCd||Varta NiMH||Sanyo NiCd|
- These batteries should be charged with our smart charger using these on-board charge cables
- Everything you need to get going is available as a package deal
- Be sure to check out the SR-3 adapter upgrade, a must-have accessory designed to upgrade your on-board adapter. (special order)
- We are proud to have over 1000 on-boards in use world wide … and growing!